陈明明,邓明,吕琳,等.闭挤式精冲成形材料流动及变形区显微状态分析[J].精密成形工程,2010,2(1):58-61.
CHEN Ming-ming,DENG Ming,LV Ling,et al.Research on Flow Mechanism of Materials and Micro-state of Distortion Area in Closed Extruding Fine-blanking Process[J].Journal of Netshape Forming Engineering,2010,2(1):58-61. |
| 闭挤式精冲成形材料流动及变形区显微状态分析 |
| Research on Flow Mechanism of Materials and Micro-state of Distortion Area in Closed Extruding Fine-blanking Process |
| 投稿时间：2009-11-27 修订日期：2010-01-10 |
| DOI： |
| 中文关键词: 精冲 成形机理 显微硬度 |
| 英文关键词: fine-blanking forming mechanism microhardness |
| 基金项目:重庆市科委攻关项目（CSTC，2007AC3032） |
|
| 摘要点击次数: 3269 |
| 全文下载次数: 2848 |
| 中文摘要: |
| 通过对闭挤式精冲零件进行金相观察，变形区流线和显微硬度分析，对闭挤式精冲加工中出现的一些材料微观状态的特点和规律进行了研究。 |
| 英文摘要: |
| There are some differences between traditional fine-blanking and closed extruding fine-blanking in stress, separation process and the changes of material's performance. By metallographic observation and analyzation of flow line of deformation zone and microhardness of the closed extruding fine-blanking parts, the characteristics and rules of the micro-state of materials in closed extruding fine-blanking process are researched. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号