宁海青,赵祖德,黄树海,等.振动时效法在薄壁铸件上的应用[J].精密成形工程,2010,2(1):53-57.
NING Hai-qing,ZHAO Zu-de,HUANG Shu-hai,et al.Application of the Vibration-ageing in Thin-walled Casting[J].Journal of Netshape Forming Engineering,2010,2(1):53-57. |
| 振动时效法在薄壁铸件上的应用 |
| Application of the Vibration-ageing in Thin-walled Casting |
| 投稿时间：2009-12-14 修订日期：2010-01-10 |
| DOI： |
| 中文关键词: 薄壁铸件 振动时效 残余应力 微塑性变形 |
| 英文关键词: thin-walled casting vibration-ageing residual stress micro plastic deformation |
| 基金项目: |
|
| 摘要点击次数: 3345 |
| 全文下载次数: 2770 |
| 中文摘要: |
| 介绍了振动时效法消除残余应力的机理以及在薄壁铸件上的应用。通过对振动时效工艺参数，包括激振点、支撑点、激振频率、激振力和激振时间等的分析，优化出了薄壁铸件的振动时效工艺。振动时效后薄壁铸件残余应力降低35%以上，应力分布得到了均化，同时与热时效相比，节约工艺成本70%以上，大大地缩短了处理时间。 |
| 英文摘要: |
| The mechanism of vibration stress relief (VSR) and its application in the thin-walled casting were introduced. VSR process parameters including vibration excitation point, support point, excitation frequency, excitation force, excitation time and so on, were analyzed to optimize the process of vibration-aging. After VSR the residual stress reduced above 35%.The stress distribution became more homogeneous. Compared with the heat aging, VSR saved the process cost above 70% and reduced the process time. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号