文章摘要
贾佳佳,张治民,张宝红,等.镁合金扇形件挤压成形数值模拟[J].精密成形工程,2009,1(1):77-79.
JIA Jia-jia,ZHANG Zhi-min,ZHANG Bao-hong,et al.The Numerical Simulation of Magnesium Alloy Fan-shaped Part[J].Journal of Netshape Forming Engineering,2009,1(1):77-79.
镁合金扇形件挤压成形数值模拟
The Numerical Simulation of Magnesium Alloy Fan-shaped Part
投稿时间:2009-05-19  修订日期:2009-07-10
DOI:
中文关键词: 镁合金  挤压成形  数值模拟
英文关键词: magnesium alloy  extrusion forming  numerical simulation
基金项目:
作者单位
贾佳佳 中北大学 材料科学与工程学院 太原030051 
张治民 山西省精密成形工程技术研究中心 太原 030051 
张宝红 山西省精密成形工程技术研究中心 太原 030051 
关玲 山西省精密成形工程技术研究中心 太原 030051 
摘要点击次数: 3231
全文下载次数: 2777
中文摘要:
      以刚塑性有限元分析为基础,对镁合金扇形零件的挤压成形工艺进行了模拟分析,制定出扇形零件的成形工艺,即镦挤-反挤压复合成形工艺。镦挤制坯工艺优化坯料结构,反挤压工艺成形零件。根据数值模拟的工艺参数进行试验研究,成形出符合要求的零件。
英文摘要:
      Upon rigid-plastic FE analysis the numerical simulation on extrusion technology of magnesium alloy fan-shaped part has been done to formulate the fan-shaped part forming process which is upsetting extrusion-anti-extrusion compound forming process. The upsetting extrusion process optimized the blank structure, and the anti-extrusion process formed the part. The experiment was done by the parameters of numerical simulation, and qualified parts were obtained.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081251位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号