曾莉,任学平,王小俐,等.高体分SiCp /Al复合材料热变形行为及组织的研究[J].精密成形工程,2009,1(1):57-61.
ZENG Li,REN Xue-ping,WANG Xiao-li,et al.The Research of Hot-deformation Behavior and Microstructure of SiCp/Al Composite with High Volume Fraction[J].Journal of Netshape Forming Engineering,2009,1(1):57-61. |
| 高体分SiCp /Al复合材料热变形行为及组织的研究 |
| The Research of Hot-deformation Behavior and Microstructure of SiCp/Al Composite with High Volume Fraction |
| 投稿时间：2009-04-16 修订日期：2009-07-10 |
| DOI： |
| 中文关键词: SiCp/Al复合材料 热压缩 本构方程 组织 |
| 英文关键词: SiCp/Al composites hot deformation constitutive relation microstructure |
| 基金项目:国家高技术（863）项目（2007AA03Z544） |
|
| 摘要点击次数: 3401 |
| 全文下载次数: 2775 |
| 中文摘要: |
| 在应变速率为0.0005~0.01 s-1、变形温度为700~900 ℃条件下，对高体积分数SiC颗粒增强Al基复合材料进行了高温压缩实验，研究了复合材料高温压缩流变应力，观察了复合材料压缩后的组织形貌。结果表明：SiCp/Al复合材料在热压缩变形中发生了伪塑性变形，流变应力随应变速率的增加而增加，随变形温度的增加而降低；通过线性回归分析计算了复合材料的应变指数n以及变形激活能Q，获得了材料高温条件下的流变应力本构方程；高温压缩后的复合材料，颗粒尺寸、圆整度及分布均匀性明显提高。 |
| 英文摘要: |
| Hot compression on the composite was tested at strain rates range from 0.0005 s-1 to 0.01s-1, deformation temperatures from 700 ℃ to 900 ℃, the flow stress behavior was researched, microstructure and properties of composite were observed and measured. The results show that: SiCp/Al composite with high volume fraction showed Pseudo-plastic deformation during hot compression, the flow stress increased with raising strain rates, decreased with raising deformation temperatures; strain exponent n and deformation activation energy Q were calculated in term of linear regression analysis, flow stress constitutive equation was got on hot compression conditions; the size, roundness and distribution uniformity of SiC particle increased obviously after hot compression. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号